|
Click here
for enlarged detail
Specifications:
Thermalized integral curb
mounting skylights shall be Model 297 as manufactured by Plasteco,
Inc. It shall consist of a Model 197 skylight mounted on a 9” insulated
double wall aluminum curb. The insulation shall be 1-1/2” thick
rigid foam. Thermalized inner frame shall have a continuous foam
gasket and self-adjusting counterflashing to reduce infiltration
(or exfiltration) of air and wind blown water from entering the
interior between the inner frame and curb. Outer dome shall be (clear,
white translucent or bronze) acrylic. Inner dome shall be (clear
or white translucent) acrylic.
Add Alternate:
Fall protection as required by OSHA Regulation 1926.501 “Duty to
have fall protection” shall be provided by FallGuard
Skylight Screens.
These shall be shipped separately and installed prior to the installation
of the skylight.
Add Alternate:
Plasteco Hail Stone Screens meet the Factory Mutual recommendations
for hail screens. The hail screens must resist impact of a 2” diameter
hail stone having an impact energy of 22 ft. lbs.
Specifications:
Hail stone screen shall consist of a 1” by 1” x .062 galvanized
welded wire mesh overlaid on the FallGuard
Skylight Screen.
|
